- 2012. 9. ~ 국민대학교 신소재공학부 교수
- 2011. 2. ~ 2012. 8 Massachusetts Institute of Technology(MIT) Post Doctoral Associate
- 2010. 8. ~ 2010. 12 연세대학교 금속공학 - 박사후연구원
- 2005. 9. ~ 2010. 8 연세대학교 금속공학 - 공학박사
- 2001. 3. ~ 2005. 8 연세대학교 금속시스템공학 - 공학학사
1. Development of nano-structured materials
알루미늄, 마그네슘 등 경량금속의 구조를 나노 단위로 미세화하고 풀러린(fullerene), 탄소나노튜브(carbon nanotubes), 그래핀(graphene) 등 다양한 나노 크기의 물질과 복합화함으로써, 자동차/우주ㆍ항공 분야에 응용할 수 있는 고강도 경량금속 복합소재를 제조하고 있습니다.
- Thermally stable nano-structured aluminum
- Aluminum-based composites containing carbon nano materials (e.g., fullerenes, CNTs, graphenes, etc)
2. Investigation on correlations of processing, microstructure, and mechanical properties in nanosize regime
소재의 미세구조가 나노 구조가 됨에 따라 기존의 이론으로 설명하기 어려운 새로운 특성의 발현, 다양한 기능성의 향상(multi-functionality) 등을 평가하고 그 원인을 분석하는 연구를 진행하고 있습니다.
- Deformation behavior of aluminum in the grain size spectrum from nano- to micrometer
- Strengthening efficiency of a variety of carbon nano-materials in light-weight metals matrix composites
- Effect of interface character on the strengthening behavior of light-weight metals matrix composites
- Correlations of processing, microstructure, and mechanical properties of powder metallurgy steel
3. Engineering scalable energy materials
차세대 에너지원으로 각광받고 있는 태양전지의 상용화를 앞당기기 위해, 결정질 실리콘의 전위(dislocation)와 불순물(impurity) 등의 결함을 제어함으로써, 태양전지의 효율을 향상시키는 연구를 진행하고 있습니다. 또한, 염료감응대양전지 혹은 연료전지의 전극 소재로 사용될 수 있는 개방형 다공체를 개발하고 있습니다.
- Manipulation of dislocations in mc-Si
- Development of open-cell copper foams with nano-pores
- D.Y Kim, H.J Chang & H.J Choi “Microscopic analysis of metal matrix composites containing carbon Nanomaterials” Applied Microscopy 50:4 (2020)
- D.Y Kim , P.R Cha, H.S Nam, H.J Choi, K.BeLee “Effect of Material and Process Variables on Characteristics of Nitridation-Induced Self-Formed Aluminum Matrix Composites part 2: Effect of Nitrogen Flow Rates and Processing Temperatures” Materials 6 13 (2020)
- “Effect of Material and Process Variables on Characteristics of Nitridation-Induced Self-Formed Aluminum Matrix Composites part 1: Effect of Reinforcement Volume Fraction, Size, and Processing Temperatures” Materials 6 13 (2020)
- W Jeong, S.E Shin, H.J Choi “Microstructure and Mechanical Properties of Titanium Equine Bone Biocomposites” 10(5) 581 (2020)
- H. Seo, H.S. Kim, K. Kim, H. Choi and J.H. Kim "Magnesium silicide-derived porous Sb-Si-C composite for stable lithium storage" J. Alloys Compd. 782 525 (2019)
- H. Kim, S. Nam, A. Roh, M. Son, M.H. Ham, J.H. Kim and H. Choi "Mechanical and electrical properites of NbMoTaW refractory high-entropy alloy thin films" Int. J. Refract. Met. Hard Mat. 80 286 (2019)
- S. Nam, J.Y. Hwang, J. Jeon, J. Park, D. Bae, M.J. Kim, J.H. Kim and H. Choi "Deformation behavior of nanocrystalline and ultrafine-grained CoCrCuFeNi high-entropy alloys" J. Mater. Res. 1 12 (2019)
- H.S Kim, W.S Cho, DH Park, KB Kim, W.S Jung, HJ Choi, J.H Kim “Zn-induced synthesis of porous SiOxmaterials as negative electrodes for Li secondary batteries” J. Alloys compd. 803 325 (2019)
- J.S Hwang, K.B Kim, W.S Jung, H.J Choi, J.H Kim “Facile and scalable synthesis of SiOxmaterials for Li-ion negative electrodes” J. POWER SOURCES 436 226883 (2019)
- S.Y Kim , H.R Oh, H.A Kim, A.Y Lee, H.J Kim, S.S Yang, Y.J Kim, H.J Choi, I.H Kim, H.G Kim, Jurgen Eckert, Jong-RyoulKim, and Min-Ha Lee “Optimizing the magnetic properties of Fe-based amorphous powder by adjusting atomic structures from vitrificationat different temperatures” JPN J APPL PHYS 126 165109 (2019)
- K.B Lee, S.H Kim, D.Y Kim, P.R Cha, H.S Kim, H.J Choi, J.P Ahn“Aluminum Matrix Composites Manufactured using Nitridation-Induced Self-Forming Process” SCI REP-UK 20989 (2019)
- S, Kim, H. Bark, S. Nam, H. Choi and H. Lee "Control of Electrical and Thermal Transport Properties by Hybridization of Two-Dimensional Tungsten Disulfide and Reduced Graphene Oxide for Thermoelectric Applications" ACS Sustain. Chem. Eng. 9 15487 (2018)
- Y.J. Lee, J.G. Jeon, S.J. Nam, T.S. Jang, H.J. Kim, M.W. Lee, Y.J. Kim, D.Y. Yang, K.S. Min, and H.J. Choi "Soft magnetic properties of Fe-based amorphous/nanocrystalline hybrid materials" Powder Technol. 339 440 (2018)
- M. Higgins, F. Ely, R Nome, R. Nome, D. Santos, H.J. Choi, S.J. Nam, and M. Quevedo "Enhanced reproducibility of planar perovskite solar cells by fullerene doping with silver nanoparticels" J. Appl. Phys. 124 065306 (2018)
- M. Serna, S. Hasan, S. J. Nam, L. BouananiS. Moreno, H.J. Choi, H. Alshareef, M. Minary, and M. Quevoedo "Low-Temperature Deposition of Layered SnSe2 for Heterojunction Diodes" 5 1800128 (2018)
- S.J. Nam, M. Kim, J.Y. Hwang, and H.J. Choi "Strengthening of Al0.15CoCrCuFeNiTix-C (x = 0, 1, 2) high-entropy alloys by grain refinement and using nanoscale carbides via powder metallurgical route" J. Alloys Compd 762 29 (2018)
- H.N. Jang, S.H. Yoo, M. Quevedo, and H.J. Choi "Effect of processing route on mechanical and thermal properties of few-layered graphene (FLG)-reinforced copper matrix composites" J. Alloys Compd. 754 7 (2018)
- D.Y. Kim, H. Kang, D.H. Bae, S.J. Nam, M. Quevedo, and H.J. Choi "Synthesis of reduced graphene oxide/aluminum nanocomposites via chemical-mechanical process" J. Compd. Mater. 52 3015 (2018)
- S.W. Kang, H. Kang, H.J. Choi and D.H. Bae "Phase boundary sliding of a reticular-structured Mg-O-9Al alloy" J. Alloys. Compd. 750 729 (2018)
- S.J. Nam, K.O. Chang, W.K. Lee, M.J. Kim, J.Y. Hwang, and H.J. Choi "Structural effect of two dimensional BNNS on grain growth suppressing behavior in Al matrix nanocomposite" Sci. Rep. 8 1614 (2018)
- D.Y. Kim, S.J. Nam, A.R. Roh, S.H. Yoo, M. Quevedo and H.J. Choi "Effect of interfacial features on the mechanical and electrical properties of rGO/Al composites" J. Mater. Sci. 522 12001 (2017)
- A.R. Roh, H.Y. Um, D.Y. Kim, S.J. Nam, H.S. Kim and H.J. Choi "Influence of high-pressure torsion and hot rolling on the microstructure and mechanical properties of aluminum-fullerene composites" J. Mater. Sci. 522 11988 (2017)
- A.J. Jo, Y.D. Seo, M.S. Ko, C.W. Kim, H.J. Kim, S.J. Nam, H.J. Choi, C.S. Hwang and M.J. Lee "Textile resistance switching memory for fabric electronics" Adv. Funct. Mater. 27 1605593 (2017)
- H.N. Jang, J.H. Kim, H. Kang, D.H. Bae, H.J. Chang and H.J. Choi "Reduced graphene oxide as a protection layer for Al" Appl. Surf. Sci. 407 1 (2017)
- K.B. Lee, Y.H. Kim, H.J. Choi and J.P. Ahn "Effect of carbon on the nitridation behavior of aluminum powder" J. Alloys Compd. 689 218 (2016)
- M. Serna, S. Moreno, M. Higgins, H.J. Choi, M. Minary and M. Quevedo "Growth Parameter Enhancement for MoS2 thin films synthetized by Pulsed Laser Deposition" Phys. Status Solidi C 13 848 (2016)
- S.B. Woo, M. Bertoni, K.M. Choi, S.J. Nam, S. Castellanos, D.M. Powell, T. Buonassisi and H.J. Choi "An insight into dislocation density reduction in multicrystalline silicon" Sol. Energy Mater. Sol.
Cells 155 88(2016)
- S.C. Yoon, S.G. Kang, Y. choi, H.J. Choi and S.J. Lee "Effect of relative density on microstructure and mechanical properties of Fe-12Mn-0.2C alloy fabricated by powder metallurgy" Powder Technol. 298 106 (2016)
- M.R. Joo, H.J. Choi, S.E. Shin and D.H. Bae "Effect of wrapped Zn plate on the densification of Al-MWCNTs composites produced by cold pressing and liquid phase sintering" Mater. Sci. Eng. A 674 91 (2016)
- K.B. Lee, Y.H. Kim, J.P. Ahn and H.J. Choi "Effect of Magnesium and Infiltration of Aluminum Powder" Met. Mater. Int. 22 557 (2016)
- S.J. Nam, J.Y. Hwang, H.K. Kim and H.J. Choi "Three-dimensional microstructure evolution and mechanical behavior of nanoporous Cu foams" Acta mater. 113 170 (2016)
- S.H. Yoo, J. Avendano, L. Delmar, S.J. Nam, M. Quevedo and H.J. Choi "Band-gap engineering of Cd1-xZnxTe films deposited by pulsed laser deposition" Thin Solid films 612 91 (2016)
- M. Serna, S.H. Yoo, S. Moreno, Y. Xi, J.P. Oviedo, H.J. Choi, H.N. Alshareef, M. Kim, M. Minary and M. Quevedo "Large-Area Deposition of MoS2 by Pulsed Laser Deposition with In Situ Thickness Control" ACS Nano 10 6054 (2016)
- H. Kang, H.J. Choi, S.W. Kang, S.E. Shin, G.S. Choi and D.H. Bae. "Multi-functional magnesium alloys containing interstitial oxygen atoms" Sci. Rep. 15 23184 (2016)
- J.G. Jeon, S.B. Woo, K.K. No, Y.J. Lee, Y.J. Choi, D.Y. Yang and Y.J. Kim. "Influence of Size Distribution and Particle Interaction on the Packing Behavior of 316L Stainless Steel Powder" J. Korea Ins. Met. Mater. 54 322 (2016)
- J.G. Jeon, S.J. Nam, S.G. Kang, J.H. Shin and H.J. Choi. "Mechanical behavior of ultrafine-grained high-Mn steels containing nanoscale oxides produced by powder technology" Mater. Des. 92 73 (2016)
- J.H. Shin, K.M. Choi, S. Shiko, H.J. Choi*, D.H. Bae*, "Mechanical damping behavior of Al/C60-fullerene composites with supersaturated Al-C phases" Compos B - Eng 77 194 (2015)
- S.E. Shin, H.J. Choi J.H. Shin and D.H. Bae*, "Strengthening behavior of few-layered graphene/aluminum composites" Carbon 82 143 (2015)
- S.E. Shin, H.J. Choi, D.H. Bae*, "Micro-alloying assisted consolidation of aluminum/carbon nanotubes powder" Mater Sci Eng A, 599 46 (2014)
- S.J. Nam, H.G. Jo, H.M. Choe, D.H. Ahn and H.J. Choi* "Development of Nanoporous Copper Foams by Chemical Dealloying of Mechanically Alloyed Al-Cu Compounds" Mater. Trans. 55 1414 (2014)
- K.M. Choi, J.Y. Seo, D.H. Bae and H.J. Choi* "Mechanical properties of aluminum-based nanocompositereinforced with fullerenes" Trans. Nonferrous Met. Soc. China 24 47 (2014)
- G.W. Jeong, J.Y. Park S.G. Kang and H.J. Choi* "Strategies to suppress grain growth of nanocrystalline aluminum" Trans. Nonferrous Met. Soc. China 24 112 (2014)
- J.H. Shin, H.J. Choi and D.H. Bae* "The structure and properties of 2024 aluminum composites reinforced with TiO2 nanoparticles" Mater. Sci. Eng. A 607 605 (2014)
- J.H. Shin, H.J. Choi M.K. Cho and D.H. Bae* "Effect of the interface layer on the mechanical behavior of TiO2 nanoparticle reinforced aluminum matrix composites" J. Compo. Mater. 48 99 (2014)
- H.J. Choi*, "Mechanical behavior of Al/C60-fullerenes nanocomposites" J Kor Soc Compos Mater 26 111 (2013).
- J.H. Shin, H.J. Choi and D.H. Bae* "Evolution of theinterfacial layer and its effect on mechanical properties in TiO2 nanoparticlereinforced aluminum matrix composites" Mater Sci Eng A 578 80 (2013)
- A. Augusto, D. Pera, H. J.Choi, P. Bellanger, M. C. Brito, J. Maia Alves, A. M. Vallêra, T. Buonassisi, and J. M. Serra* "Residual stress and dislocations density insilicon ribbons grown via optical zone melting", J Appl Phys, 113 083510 (2013)
- J.H. Shin, S.Y. Yoon, H.J. Choi, S.E. Shin, D.H. Bae* "Formation of an Interstitially Alloyed Phase in Mg/C60 Composite" Met Mater Int 19 851 (2013).
- S.E. Shin, H.J. Choi, D.H. Bae* "Electrical and thermal conductivities of aluminum-based composites containing multi-walled carbon nanotubes", J Compos Mater, 47 2239 (2013)
- H.J. Choi, J.H. Shin, D.H. Bae* "The effect of milling conditions on microstructures and mechanical properties of Al/MWCNT composites" Compos A -Appl Sci Manuf 43 2019 (2012).
- D.M. Powell, M.T. Winkler, H.J. Choi, C.B. Simmons, D. Berney Needleman and T. Buonassisi* "Crystalline silicon photovoltaics: a costanalysis framework for determining technology pathways to reach baseloadelectricity costs" Energy Environ Sci 55874 (2012).
- H.J. Choi, D.H. Bae* "Creep properties of aluminum-based composite containing multi-walled carbon nanotubes" Scripta Mater 65 194 (2011).
- H.J. Choi, B.H. Min, J.H. Shin, D.H.Bae* "Strengthening in nanostructured 2024 aluminum alloy and its composites containing carbon nanotubes" Compos A- Appl Sci Manuf 42 1438 (2011).
- H.J. Choi, D.H. Bae* "Strengthening and toughening of aluminum by single-walled carbon nanotubes" Mater Sci Eng A 528 2412 (2011).
- H.J. Choi, J.H. Shin and D.H. Bae* "Self-assembled network structures in Al/C60composites" Carbon 48 3700(2010).
- Corrosion behaviors of titanium-based metallic glass alloys without Be for additive manufacturing
- Development of aluminum/carbon hybrid EMI shielding fabric via chemical process and mechanical process
- Development of flexible piezo-resistance composite for touch sensor by using a 3D printing process
- Fabrication of Al2CuCrFe High Entropy alloy foam via de-alloying
- Development of oxide-dispersion strengthened CoCrFeMnNimatrix composites
- A study on the mixing ratio to improve the packing fraction of Tri-modal amorphous soft magnetic powders
- Development of magnetic properties of amorphous soft magnetic powders via organic and hybrid coating